Initial commit of the Master Thesis

This commit is contained in:
Radu C. Martin 2021-03-05 13:44:40 +01:00
commit 86ce14c278
5 changed files with 432 additions and 0 deletions

22
00_First_Page.tex Normal file
View file

@ -0,0 +1,22 @@
\begin{titlepage}
\begin{center}
\includegraphics[width=0.5\linewidth]{Logo-EPFL.png}\par
\vspace{5cm}
{\Huge \bf Inter-seasonal performance of Gaussian Process models for building temperature prediction \par}
\vspace{1cm}
{\LARGE \bf Master Project\par}
\vspace{6cm}
{\Large Radu C. Martin}\par
\vspace{2cm}
{\large Professor: Colin Jones}\par
{\large Supervisor: Manuel Pascal Koch}\par
\vspace{0.5cm}
{\large\today}
\end{center}
\end{titlepage}

2
01_Introduction.tex Normal file
View file

@ -0,0 +1,2 @@
\section{Introduction}
Lorem ipsum dolor sit amet

BIN
Logo-EPFL.png Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 12 KiB

106
main.tex Normal file
View file

@ -0,0 +1,106 @@
\documentclass[a4paper,11pt]{article}
\usepackage{graphicx}
\usepackage[font=normal,textfont=it]{caption}
\DeclareCaptionType{Code} %Preparation for eventual code numbering
\renewcommand{\theCode}{\arabic{Code}}
\usepackage{subcaption}
%\usepackage[numbers]{natbib}
\usepackage{url}
\usepackage{array}
\usepackage{makecell}
\usepackage{comment}
%\usepackage{fixltx2e}
%% Language and font encodings
\usepackage[T1]{fontenc}
\usepackage[english]{babel}
\usepackage[utf8]{inputenc}
\usepackage{csquotes} % Removes a compilation warning
\usepackage{changepage}
%SI Package
\usepackage[binary-units=true]{siunitx}
%\sisetup{group-separator = \text{\,}}
%\sisetup{group-minimum-digits = {4}}
%footnote
\usepackage[bottom]{footmisc}
%% Sets page size and margins
\usepackage[a4paper,top=2cm,bottom=2cm,left=2cm,right=2cm,marginparwidth=1.75cm]{geometry}
%% Useful packages
\usepackage{amsmath}
\DeclareMathOperator{\E}{\mathbb{E}}
\usepackage{graphicx}
\usepackage{mathtools}
\usepackage{textcomp} %defines \perthousand and \micro for gensymb
\usepackage{gensymb} %math in text
\DeclarePairedDelimiter{\norm}{\lVert}{\rVert}
%\usepackage[colorinlistoftodos]{todonotes}
%\usepackage[colorlinks=true, allcolors=black]{hyperref}
%packages for hyperlinperlin
%\usepackage{hyperref}
%\hypersetup{pdftex,colorlinks=false,allcolors=black}
%\usepackage{hypcap}
%Bibliography
\usepackage[sorting=none]{biblatex}
\addbibresource{references.bib}
\usepackage{chngcntr}
%\counterwithin{figure}{section}
\counterwithin{table}{section}
%\usepackage[table,xcdraw]{xcolor}
\usepackage{amssymb}
\usepackage{float}
\usepackage{adjustbox}
\usepackage{textgreek}
\usepackage{multirow}
\usepackage{color}
\usepackage[table,xcdraw,dvipsnames]{xcolor}
\usepackage{wrapfig}
\usepackage[final]{pdfpages}
\usepackage{listings}
\lstset{
basicstyle=\ttfamily,
columns=fullflexible,
}
\renewcommand{\familydefault}{\sfdefault}
\title{Inter-seasonal performance of Gaussian Process models for building temperature prediction}
\author{Radu C. Martin}
%header
%\usepackage[headsep=0.5cm,margin=1.5cm,bottom=2cm,headheight=5pt,includeheadfoot]{geometry}
\usepackage{fancyhdr}
\pagestyle{fancy}
\setlength\headheight{35pt}
%\fancyhf{Inter-seasonal performance of GP models for building temperature prediction}
\fancyhf{Inter-seasonal GP performance for HVAC}
\rhead{\includegraphics[width=2cm]{Logo-EPFL.png}}
\lhead{}
\cfoot{\thepage}
\usepackage[framed,numbered,autolinebreaks,useliterate]{mcode}
\setlength{\parskip}{0.5em}
\setlength\parindent{0pt}
\begin{document}
\selectlanguage{english}
\input{00_First_Page.tex}
\tableofcontents
\clearpage
\input{01_Introduction.tex}
\end{document}

302
mcode.sty Normal file
View file

@ -0,0 +1,302 @@
%%
%% This is file `mcode.sty'
%%
%% It is supposed to help you easily include MATLAB source code
%% into LaTeX document, but have it nicely highlighted, using
%% the great listings package.
%%
%% PLEASE NOTE that this package does nothing but save you from
%% figuring out some configurations in setting up the LISTINGS
%% package. ALL the work is done by that package! Thus, please
%% refer your questions to the listings package documentation.
%%
%% Usage: You have three ways of including your MATLAB code. As
%% environment, as inline object and directly from an external
%% file.
%%
%% 1) Environment:
%%
%% \begin{lstlisting}
%% YOUR CODE HERE
%% \end{lstlisting}
%%
%%
%% 2) Inline object*:
%%
%% Bla bla \mcode{CODEFRAGMENT} bla bla.
%%
%%
%% 3) Include external file (in environment form)
%%
%% \lstinputlisting{YOUR-FILE.m}
%%
%%
%% For your convenience this package has the following options:
%%
%% - bw if you intend to print the document (highlighting done
%% via text formatting (bold, italic) and shades of gray)
%%
%% - numbered if you want line numbers
%%
%% - autolinebreaks if you want the package to automatically
%% wrap your code. This is buggy as it may well break
%% break syntax and it doesn't work well with comments.
%% You REALLY should wrap your code manually.
%%
%% - useliterate if you want some characters / relations in
%% your code to be replace with something more readable.
%% Example: ~= becomes $\neq$, >= becomes $\geq$, delta
%% becomes $\delta$ and so on.
%%
%% - framed if you want a frame around the source code blocks
%%
%% - final if you have ``gloablly'' set the draft option, the
%% listings package will not output the code at all. to
%% force it to do so anyway, load this package with the
%% final option (passes the ``final'' on to listings).
%%
%% For example, you may use \usepackage[numbered,framed]{mcode}
%% in your document preamble.
%%
%% * If you want to place some inline code in a footnote, use
%% \mcodefn{} instead (this will reduce the font size a bit).
%%
%% Note: Inside code blocks you can escape to LaTeX text mode
%% using §...§. For ex. §text and some math: $x^2$§, which is
%% especially useful in comments for putting nicely typeset
%% equations etc. To get the same colour/style as in the rest
%% of the comment use \mcommentfont, i.e. §\mcommentfont $x^2$§
%%
%% To change the font used, edit the first line in the "custo-
%% mise below" section. And feel free to edit other things as
%% well. Refer to the documentation of the listings package to
%% see what else you could do. If an extra small font is re-
%% quired, use {\fontfamily{pcr}\fontsize{3}{4.6}\selectfont}
%% in the definition of \lstbasicfont.
%%
%% Author:
%% Florian Knorn | florian@knorn.org | www.florian-knorn.com
%%
%% Version history:
%% 2.7 -- Bugfixes + keywords (thanks Hildo Guillardi Jr.)
%% 2.6 -- Add support for µ, fix for math-minus problem
%% 2.5 -- Renamed internal variables (thx S. Kranenbarg!)
%% 2.4 -- Added \mcodefn{} command (thx Tony Almeida!)
%% 2.3 -- More keywords (thx Dominik Wild!)
%% 2.2 -- Bugfix (thx Willi Gerbig!)
%% 2.1 -- Finally automatic detection between end and end
%% 2.0 -- New options for line breaking and literate prog.
%% 1.8 -- Fixed typo in documentation regarding §...§
%% 1.7 -- Added MATLAB block comment syntax %{ ...... %}
%% 1.6 -- Added some infos, dealing with keyword ``end''
%% 1.5 -- Tweaked check to see wether textcomp is loaded
%% 1.4 -- Fixed misconfig (mathescape now set to false)
%% 1.3 -- Purely cosmetic (tabs replaced by spaces)
%% 1.2 -- Added \lstset{showstringspaces=false}
%% 1.1 -- Added \mcode command and [final] option
%% 1.0 -- Release
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% D O N ' T T O U C H T H I S %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\def\fileversion{2.7}
\def\filedate{2015/11/11}
\typeout{-- Package: `mcode' \fileversion\space <\filedate> --}
\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{mcode}[\filedate\space\fileversion]
% for bw-option
\newif\ifmcode@bw
\DeclareOption{bw}{\mcode@bwtrue}
% numbered option
\newif\ifmcode@numbered
\DeclareOption{numbered}{\mcode@numberedtrue}
% final option
\newif\ifmcode@final
\DeclareOption{final}{\mcode@finaltrue}
% autolinebreaks option
\newif\ifmcode@autolinebreaks
\DeclareOption{autolinebreaks}{\mcode@autolinebreakstrue}
% literate programming (replace certain characters/relations
\newif\ifmcode@useliterate
\DeclareOption{useliterate}{\mcode@useliteratetrue}
% framed option
\newif\ifmcode@framed
\DeclareOption{framed}{\mcode@framedtrue}
\DeclareOption*{% default
\PackageWarning{mcode}{Unknown option `\CurrentOption' !}%
}
\ProcessOptions
\ifmcode@bw\typeout{ - settings optimized for printing (bw formating)}
\else\typeout{ - settings optimized for display (colour formating)}\fi
\ifmcode@numbered\typeout{ - line numbering enabled}\else\fi
\ifmcode@useliterate\typeout{ - literate programming (character replacements) enabled}\else\fi
\ifmcode@autolinebreaks\typeout{ - automatic line breaking enabled (careful, buggy!)}\else\fi
\ifmcode@framed\typeout{ - framed listings}\else\fi
% This command allows you to typeset syntax highlighted Matlab
% code ``inline''. The font size \small seems to look best...
\newcommand{\mcode}[1]{\lstinline[basicstyle=\lstbasicfont\small]|#1|}
% Same, but for footnotes
\newcommand{\mcodefn}[1]{\lstinline[basicstyle=\lstbasicfont\footnotesize]|#1|}
% check if color command exists
\ifx\color\undefined%
\RequirePackage{xcolor}%
\fi
% check if listings has been loaded
\ifx\lstset\undefined%
\ifmcode@final
\RequirePackage[final]{listings}
\else
\RequirePackage{listings}
\fi
\fi
% Check if textcomp has been loaded (this package is needed for
% upright quotes '' (instead of typographic ones `´)...
\ifx\textquotesingle\undefined%
\RequirePackage{textcomp}%
\fi
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% C U S T O M I S E B E L O W %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% ---------------------------------------------------------------------------------
% default font
\def\lstbasicfont{\fontfamily{pcr}\selectfont\footnotesize}
% ---------------------------------------------------------------------------------
% matlat languate definition
\lstdefinelanguage{matlabfloz}{%
alsoletter={...},%
morekeywords={% % keywords
break,case,catch,classdef,continue,else,
elseif,end,for,function,global,if,
otherwise,parfor,persistent,
return,spmd,switch,try,while,...}, % Use the matlab "iskeyword" command to get those
comment=[l]\%, % comments
morecomment=[l]..., % comments
morecomment=[s]{\%\{}{\%\}}, % block comments
morestring=[m]' % strings
}[keywords,comments,strings]%
% ---------------------------------------------------------------------------------
% general definitions
\lstset{%
basicstyle={\lstbasicfont}, % set font
showstringspaces=false, % do not emphasize spaces in strings
tabsize=4, % number of spaces of a TAB
mathescape=false,escapechar=§, % escape to latex with §...§
upquote=true, % upright quotes
aboveskip={1.5\baselineskip}, % a bit of space above listings
columns=fixed % nice spacing
}
% ---------------------------------------------------------------------------------
% define colours and styles
\ifmcode@bw % use font formating and gray 'colors'
\def\mcommentfont{\color[gray]{.75}\itshape} %comments light gray and italic
\lstset{language=matlabfloz, % use our version of highlighting
keywordstyle=\bfseries, % keywords in bold
commentstyle=\mcommentfont, % comments
stringstyle=\color[gray]{0.5} % strings darker gray
}
\else% notbw => use colors : )
\def\mcommentfont{\color[rgb]{.133,.545,.133}} %comments in green
\lstset{language=matlabfloz, % use our version of highlighting
keywordstyle=\color[rgb]{0,0,1}, % keywords in blue
commentstyle=\mcommentfont, % comments
stringstyle=\color[rgb]{.627,.126,.941} % strings in purple
}
\fi%bw
% ---------------------------------------------------------------------------------
% automatic line breaking --- warning, this is buggy and
% doesn't break comments correctly!
\ifmcode@autolinebreaks
\newsavebox{\lbreakdots}\sbox{\lbreakdots}{\lstbasicfont\mcommentfont...}
\lstset{breaklines=true,breakatwhitespace=true,prebreak=\usebox{\lbreakdots}}
\fi
% ---------------------------------------------------------------------------------
% literate replacements
% the following is for replacing some matlab relations like >= or ~=
% by the corresponding LaTeX symbols, which are much easier to read ...
\ifmcode@useliterate
\lstset{%
literate=%
{~}{{$\neg$}}1 % \neg, logical not
{<=}{{\tiny$\leq$}}1 % \leq
{>=}{{\tiny$\geq$}}1 % \geq
{~=}{{\tiny$\neq$}}1 % \neq, not equal
{delta}{{\tiny$\Delta$}}1 % \Delta
{µ}{{$\mu$}}1 % \mu
{(end)}{\lstbasicfont (end)}{5} % black ``end'' when indexing last vector element
{({ }end)}{\lstbasicfont ({ }end)}{6}
{(end{ })}{\lstbasicfont (end{ })}{6}
{({ }end{ })}{\lstbasicfont ({ }end{ })}{7}
{:end}{\lstbasicfont :end}{4}
{:{ }end}{\lstbasicfont :{ }end}{5}
{end:}{\lstbasicfont end:}{4}
{end{ }:}{\lstbasicfont end{ }:}{5}
{,end}{\lstbasicfont ,end}{4}
{,{ }end}{\lstbasicfont ,{ }end}{5}
}
\else
\lstset{%
literate=%
{(end)}{\lstbasicfont (end)}{5} % black ``end'' when indexing last vector element
{({ }end)}{\lstbasicfont ({ }end)}{6}
{(end{ })}{\lstbasicfont (end{ })}{6}
{({ }end{ })}{\lstbasicfont ({ }end{ })}{7}
{:end}{\lstbasicfont :end}{4}
{:{ }end}{\lstbasicfont :{ }end}{5}
{end:}{\lstbasicfont end:}{4}
{end{ }:}{\lstbasicfont end{ }:}{5}
{,end}{\lstbasicfont ,end}{4}
{,{ }end}{\lstbasicfont ,{ }end}{5}
{µ}{$\mu$}1
{~}{{\fontfamily{ptm}\selectfont\texttildelow}}1 % get a nicer tilde character
}
\fi%literates
% ---------------------------------------------------------------------------------
% line numbering
\ifmcode@numbered% numbered option
\lstset{%
numbersep=3mm, numbers=left, numberstyle=\tiny, % number style
}
\fi
\ifmcode@framed% framed option
\lstset{%
frame=single,rulecolor=\color{black} % frame
}
\ifmcode@numbered%
\lstset{%
framexleftmargin=6mm, xleftmargin=6mm % tweak margins
}
\fi
\fi
% fix for ``minus'' character issue, as suggested by Stefan Karlsson, thanks!
\makeatletter
\lst@CCPutMacro\lst@ProcessOther {"2D}{\lst@ttfamily{-{}}{-{}}}
\@empty\z@\@empty
\makeatother
\endinput
%% End of file `mcode.sty'.