diff --git a/lua/config/lazy.lua b/lua/config/lazy.lua index e7ce7aa..5f0d25a 100644 --- a/lua/config/lazy.lua +++ b/lua/config/lazy.lua @@ -25,187 +25,6 @@ require('lazy').setup({ -- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link). 'tpope/vim-sleuth', -- Detect tabstop and shiftwidth automatically - -- NOTE: Plugins can also be configured to run Lua code when they are loaded. - -- - -- This is often very useful to both group configuration, as well as handle - -- lazy loading plugins that don't need to be loaded immediately at startup. - -- - -- For example, in the following configuration, we use: - -- event = 'VimEnter' - -- - -- which loads which-key before all the UI elements are loaded. Events can be - -- normal autocommands events (`:help autocmd-events`). - -- - -- Then, because we use the `config` key, the configuration only runs - -- after the plugin has been loaded: - -- config = function() ... end - - { -- Useful plugin to show you pending keybinds. - 'folke/which-key.nvim', - event = 'VimEnter', -- Sets the loading event to 'VimEnter' - opts = { - icons = { - -- set icon mappings to true if you have a Nerd Font - mappings = vim.g.have_nerd_font, - -- If you are using a Nerd Font: set icons.keys to an empty table which will use the - -- default which-key.nvim defined Nerd Font icons, otherwise define a string table - keys = vim.g.have_nerd_font and {} or { - Up = ' ', - Down = ' ', - Left = ' ', - Right = ' ', - C = ' ', - M = ' ', - D = ' ', - S = ' ', - CR = ' ', - Esc = ' ', - ScrollWheelDown = ' ', - ScrollWheelUp = ' ', - NL = ' ', - BS = ' ', - Space = ' ', - Tab = ' ', - F1 = '', - F2 = '', - F3 = '', - F4 = '', - F5 = '', - F6 = '', - F7 = '', - F8 = '', - F9 = '', - F10 = '', - F11 = '', - F12 = '', - }, - }, - - -- Document existing key chains - spec = { - { 'c', group = '[C]ode', mode = { 'n', 'x' } }, - { 'd', group = '[D]ocument' }, - { 'r', group = '[R]ename' }, - { 's', group = '[S]earch' }, - { 'w', group = '[W]orkspace' }, - { 't', group = '[T]oggle' }, - { 'h', group = 'Git [H]unk', mode = { 'n', 'v' } }, - }, - }, - }, - - -- NOTE: Plugins can specify dependencies. - -- - -- The dependencies are proper plugin specifications as well - anything - -- you do for a plugin at the top level, you can do for a dependency. - -- - -- Use the `dependencies` key to specify the dependencies of a particular plugin - - { -- Fuzzy Finder (files, lsp, etc) - 'nvim-telescope/telescope.nvim', - event = 'VimEnter', - branch = '0.1.x', - dependencies = { - 'nvim-lua/plenary.nvim', - { -- If encountering errors, see telescope-fzf-native README for installation instructions - 'nvim-telescope/telescope-fzf-native.nvim', - - -- `build` is used to run some command when the plugin is installed/updated. - -- This is only run then, not every time Neovim starts up. - build = 'make', - - -- `cond` is a condition used to determine whether this plugin should be - -- installed and loaded. - cond = function() - return vim.fn.executable 'make' == 1 - end, - }, - { 'nvim-telescope/telescope-ui-select.nvim' }, - - -- Useful for getting pretty icons, but requires a Nerd Font. - { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font }, - }, - config = function() - -- Telescope is a fuzzy finder that comes with a lot of different things that - -- it can fuzzy find! It's more than just a "file finder", it can search - -- many different aspects of Neovim, your workspace, LSP, and more! - -- - -- The easiest way to use Telescope, is to start by doing something like: - -- :Telescope help_tags - -- - -- After running this command, a window will open up and you're able to - -- type in the prompt window. You'll see a list of `help_tags` options and - -- a corresponding preview of the help. - -- - -- Two important keymaps to use while in Telescope are: - -- - Insert mode: - -- - Normal mode: ? - -- - -- This opens a window that shows you all of the keymaps for the current - -- Telescope picker. This is really useful to discover what Telescope can - -- do as well as how to actually do it! - - -- [[ Configure Telescope ]] - -- See `:help telescope` and `:help telescope.setup()` - require('telescope').setup { - -- You can put your default mappings / updates / etc. in here - -- All the info you're looking for is in `:help telescope.setup()` - -- - -- defaults = { - -- mappings = { - -- i = { [''] = 'to_fuzzy_refine' }, - -- }, - -- }, - -- pickers = {} - extensions = { - ['ui-select'] = { - require('telescope.themes').get_dropdown(), - }, - }, - } - - -- Enable Telescope extensions if they are installed - pcall(require('telescope').load_extension, 'fzf') - pcall(require('telescope').load_extension, 'ui-select') - - -- See `:help telescope.builtin` - local builtin = require 'telescope.builtin' - vim.keymap.set('n', 'sh', builtin.help_tags, { desc = '[S]earch [H]elp' }) - vim.keymap.set('n', 'sk', builtin.keymaps, { desc = '[S]earch [K]eymaps' }) - vim.keymap.set('n', 'sf', builtin.find_files, { desc = '[S]earch [F]iles' }) - vim.keymap.set('n', 'ss', builtin.builtin, { desc = '[S]earch [S]elect Telescope' }) - vim.keymap.set('n', 'sw', builtin.grep_string, { desc = '[S]earch current [W]ord' }) - vim.keymap.set('n', 'sg', builtin.live_grep, { desc = '[S]earch by [G]rep' }) - vim.keymap.set('n', 'sd', builtin.diagnostics, { desc = '[S]earch [D]iagnostics' }) - vim.keymap.set('n', 'sr', builtin.resume, { desc = '[S]earch [R]esume' }) - vim.keymap.set('n', 's.', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' }) - vim.keymap.set('n', '', builtin.buffers, { desc = '[ ] Find existing buffers' }) - - -- Slightly advanced example of overriding default behavior and theme - vim.keymap.set('n', '/', function() - -- You can pass additional configuration to Telescope to change the theme, layout, etc. - builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown { - winblend = 10, - previewer = false, - }) - end, { desc = '[/] Fuzzily search in current buffer' }) - - -- It's also possible to pass additional configuration options. - -- See `:help telescope.builtin.live_grep()` for information about particular keys - vim.keymap.set('n', 's/', function() - builtin.live_grep { - grep_open_files = true, - prompt_title = 'Live Grep in Open Files', - } - end, { desc = '[S]earch [/] in Open Files' }) - - -- Shortcut for searching your Neovim configuration files - vim.keymap.set('n', 'sn', function() - builtin.find_files { cwd = vim.fn.stdpath 'config' } - end, { desc = '[S]earch [N]eovim files' }) - end, - }, - -- LSP Plugins { -- `lazydev` configures Lua LSP for your Neovim config, runtime and plugins diff --git a/lua/plugins/telescope.lua b/lua/plugins/telescope.lua new file mode 100644 index 0000000..234e89d --- /dev/null +++ b/lua/plugins/telescope.lua @@ -0,0 +1,111 @@ +-- NOTE: Plugins can specify dependencies. +-- +-- The dependencies are proper plugin specifications as well - anything +-- you do for a plugin at the top level, you can do for a dependency. +-- +-- Use the `dependencies` key to specify the dependencies of a particular plugin + +return { -- Fuzzy Finder (files, lsp, etc) + 'nvim-telescope/telescope.nvim', + event = 'VimEnter', + branch = '0.1.x', + dependencies = { + 'nvim-lua/plenary.nvim', + { -- If encountering errors, see telescope-fzf-native README for installation instructions + 'nvim-telescope/telescope-fzf-native.nvim', + + -- `build` is used to run some command when the plugin is installed/updated. + -- This is only run then, not every time Neovim starts up. + build = 'make', + + -- `cond` is a condition used to determine whether this plugin should be + -- installed and loaded. + cond = function() + return vim.fn.executable 'make' == 1 -- 'make' executable exists on host + end, + }, + { 'nvim-telescope/telescope-ui-select.nvim' }, + + -- Useful for getting pretty icons, but requires a Nerd Font. + { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font }, + }, + config = function() + -- Telescope is a fuzzy finder that comes with a lot of different things that + -- it can fuzzy find! It's more than just a "file finder", it can search + -- many different aspects of Neovim, your workspace, LSP, and more! + -- + -- The easiest way to use Telescope, is to start by doing something like: + -- :Telescope help_tags + -- + -- After running this command, a window will open up and you're able to + -- type in the prompt window. You'll see a list of `help_tags` options and + -- a corresponding preview of the help. + -- + -- Two important keymaps to use while in Telescope are: + -- - Insert mode: + -- - Normal mode: ? + -- + -- This opens a window that shows you all of the keymaps for the current + -- Telescope picker. This is really useful to discover what Telescope can + -- do as well as how to actually do it! + + -- [[ Configure Telescope ]] + -- See `:help telescope` and `:help telescope.setup()` + require('telescope').setup { + -- You can put your default mappings / updates / etc. in here + -- All the info you're looking for is in `:help telescope.setup()` + -- + -- defaults = { + -- mappings = { + -- i = { [''] = 'to_fuzzy_refine' }, + -- }, + -- }, + -- pickers = {} + extensions = { + ['ui-select'] = { + require('telescope.themes').get_dropdown(), + }, + }, + } + + -- Enable Telescope extensions if they are installed + pcall(require('telescope').load_extension, 'fzf') + pcall(require('telescope').load_extension, 'ui-select') + + -- See `:help telescope.builtin` + local builtin = require 'telescope.builtin' + vim.keymap.set('n', 'sh', builtin.help_tags, { desc = '[S]earch [H]elp' }) + vim.keymap.set('n', 'sk', builtin.keymaps, { desc = '[S]earch [K]eymaps' }) + vim.keymap.set('n', 'sf', builtin.find_files, { desc = '[S]earch [F]iles' }) + vim.keymap.set('n', 'ss', builtin.builtin, { desc = '[S]earch [S]elect Telescope' }) + vim.keymap.set('n', 'sw', builtin.grep_string, { desc = '[S]earch current [W]ord' }) + vim.keymap.set('n', 'sg', builtin.live_grep, { desc = '[S]earch by [G]rep' }) + vim.keymap.set('n', 'sd', builtin.diagnostics, { desc = '[S]earch [D]iagnostics' }) + vim.keymap.set('n', 'sr', builtin.resume, { desc = '[S]earch [R]esume' }) + vim.keymap.set('n', 's.', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' }) + vim.keymap.set('n', '', builtin.buffers, { desc = '[ ] Find existing buffers' }) + + -- Slightly advanced example of overriding default behavior and theme + vim.keymap.set('n', '/', function() + -- You can pass additional configuration to Telescope to change the theme, layout, etc. + builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown { + winblend = 10, + previewer = false, + }) + end, { desc = '[/] Fuzzily search in current buffer' }) + + -- It's also possible to pass additional configuration options. + -- See `:help telescope.builtin.live_grep()` for information about particular keys + vim.keymap.set('n', 's/', function() + builtin.live_grep { + grep_open_files = true, + prompt_title = 'Live Grep in Open Files', + } + end, { desc = '[S]earch [/] in Open Files' }) + + -- Shortcut for searching your Neovim configuration files + vim.keymap.set('n', 'sn', function() + builtin.find_files { cwd = vim.fn.stdpath 'config' } + end, { desc = '[S]earch [N]eovim files' }) + end, +} diff --git a/lua/plugins/which-key.lua b/lua/plugins/which-key.lua new file mode 100644 index 0000000..2292f44 --- /dev/null +++ b/lua/plugins/which-key.lua @@ -0,0 +1,68 @@ + -- NOTE: Plugins can also be configured to run Lua code when they are loaded. + -- + -- This is often very useful to both group configuration, as well as handle + -- lazy loading plugins that don't need to be loaded immediately at startup. + -- + -- For example, in the following configuration, we use: + -- event = 'VimEnter' + -- + -- which loads which-key before all the UI elements are loaded. Events can be + -- normal autocommands events (`:help autocmd-events`). + -- + -- Then, because we use the `config` key, the configuration only runs + -- after the plugin has been loaded: + -- config = function() ... end + +return { -- Useful plugin to show you pending keybinds. + 'folke/which-key.nvim', + event = 'VimEnter', -- Sets the loading event to 'VimEnter' + opts = { + icons = { + -- set icon mappings to true if you have a Nerd Font + mappings = vim.g.have_nerd_font, + -- If you are using a Nerd Font: set icons.keys to an empty table which will use the + -- default which-key.nvim defined Nerd Font icons, otherwise define a string table + keys = vim.g.have_nerd_font and {} or { + Up = ' ', + Down = ' ', + Left = ' ', + Right = ' ', + C = ' ', + M = ' ', + D = ' ', + S = ' ', + CR = ' ', + Esc = ' ', + ScrollWheelDown = ' ', + ScrollWheelUp = ' ', + NL = ' ', + BS = ' ', + Space = ' ', + Tab = ' ', + F1 = '', + F2 = '', + F3 = '', + F4 = '', + F5 = '', + F6 = '', + F7 = '', + F8 = '', + F9 = '', + F10 = '', + F11 = '', + F12 = '', + }, + }, + + -- Document existing key chains + spec = { + { 'c', group = '[C]ode', mode = { 'n', 'x' } }, + { 'd', group = '[D]ocument' }, + { 'r', group = '[R]ename' }, + { 's', group = '[S]earch' }, + { 'w', group = '[W]orkspace' }, + { 't', group = '[T]oggle' }, + { 'h', group = 'Git [H]unk', mode = { 'n', 'v' } }, + }, + }, + }